1. n. [Enhanced Oil Recovery]

A well-stimulation operation in which acid, usually hydrochloric [HCl], is injected into a carbonate formation at a pressure above the formation-fracturing pressure. Flowing acid tends to etch the fracture faces in a nonuniform pattern, forming conductive channels that remain open without a propping agent after the fracture closes. The length of the etched fracture limits the effectiveness of an acid-fracture treatment. The fracture length depends on acid leakoff and acid spending. If acid fluid-loss characteristics are poor, excessive leakoff will terminate fracture extension. Similarly, if the acid spends too rapidly, the etched portion of the fracture will be too short. The major problem in fracture acidizing is the development of wormholes in the fracture face; these wormholes increase the reactive surface area and cause excessive leakoff and rapid spending of the acid. To some extent, this problem can be overcome by using inert fluid-loss additives to bridge wormholes or by using viscosified acids. Fracture acidizing is also called acid fracturing or acid-fracture treatment.

See related terms: acid frac,  fluid loss,  formation fracture pressure,  hydraulic fracturing,  matrix stimulation